#!/usr/bin/perl
# IBM(c) 2016 EPL license http://www.eclipse.org/legal/epl-v10.html

BEGIN { $::XCATROOT = $ENV{'XCATROOT'} ? $ENV{'XCATROOT'} : -d '/opt/xcat' ? '/opt/xcat' : '/usr'; }

use lib "$::XCATROOT/probe/lib/perl";
use probe_utils;
use LogParse;
use probe_global_constant;
use xCAT::NetworkUtils;
use File::Basename;
use IO::Select;
use Time::Local;
use Data::Dumper;
use Getopt::Long qw(:config no_ignore_case);

#---------------------------------------------
#             Global attributes
#---------------------------------------------

#-------MAC to IP/node map list-------
# $macmap{mac_addr}{"ip"}="x.x.x.x"
# $macmap{mac_addr}{"node"}="nodename"
#-------------------------------------
my %macmap;

#------IP to node map list-------
# $ipnodemap{ip_addr}="nodename"
#--------------------------------
my %ipnodemap;

#The NIC of provision network
my $installnic;

#Used by customer or developer, to obtain more output information
my $verbose = 0;

#if no specific instruction, do monitor by default
my $monitor = 1;

#used by developer, to debug the detail information about function running
my $debug = 0;

my $osdeploy_start_time;

#---------------------------------------------
#            Command Usage
#---------------------------------------------
my $program_name = basename("$0");
$::USAGE = "Usage:
    $program_name -h
    $program_name -n <node_range> [-t <max_waiting_time>] [-p <level>] [-V]
    $program_name -n <node_range> -r <roll_back_duration> [-p <level>] [-V]

Description:
    Probe operating system provision process. Supports two modes - 'Realtime monitor' and 'Replay history'.
    Realtime monitor: This is a default. This tool with monitor provision state of the node. Trigger 'Realtime monitor' before rebooting target node to do provisioning.
    Replay history: Used after provisioning is finished to probe the previously completed provisioning.

    [NOTE] Currently, hierarchial structure is not supported.

Options:
    -h : Get usage information of $program_name
    -V : Output more information
    -n : The range of nodes to be monitored or replayed.
    -t : The maximum time to wait when doing monitor, unit is minutes. default is 60.
    -r : Trigger 'Replay history' mode. Follow the duration of rolling back. Units are 'h' (hour) or 'm' (minute)
         Supported format examples: 3h30m (3 hours and 30 minutes ago), 2h (2 hours ago), 40m (40 minutes ago) and 3 (3 hours ago).
         If unit is not specified, hour will be used by default.
    -p Show elapsed time of each stage during provision for each node
         Support 3 output format:
         'compact': Elapsed time of provision for each node.
         'phase'  : Elapsed time for DHCP, INSTALL, POSTSCRIPTS and POSTBOOTSCRIPTS stages, and time for whole provision.
         'origin' : Show origin start time of each stage.
";


#----------------------------------------------
#               Main process
#----------------------------------------------

# parse command line arguments
my $help        = 0;
my $test        = 0;
my $maxwaittime = 60;    #unit is minute, the max wait time of monitor
my $rollforward_time_of_replay;    #used by feature replay provision log
my $noderange;
if (
    !GetOptions("--help|h|?" => \$help,
        "T"   => \$test,
        "V"   => \$verbose,
        "p=s" => \$performance,
        "t=s" => \$maxwaittime,
        "r=s" => \$rollforward_time_of_replay,
        "n=s" => \$noderange))
{
    probe_utils->send_msg("stdout", "f", "Invalid parameter for $program_name");
    probe_utils->send_msg("stdout", "",  "$::USAGE");
    exit 1;
}

if ($help) {
    probe_utils->send_msg("stdout", "", "$::USAGE");
    exit 0;
}

if ($test) {
    probe_utils->send_msg("stdout", "o", "Probe operating system provision process. Supports two modes - 'Realtime monitor' and 'Replay history'.");
    exit 0;
}

unless ($noderange) {
    probe_utils->send_msg("stdout", "f", "A noderange is required");
    probe_utils->send_msg("stdout", "",  "$::USAGE");
    exit 1;
}

my @nodes = split (",", $noderange);
my @error_nodes;
foreach my $node (@nodes) {
    if ($node =~ /^-/) {
        push @error_nodes, $node;
    }
}
if (@error_nodes) {
    my $error = join (",", @error_nodes);
    probe_utils->send_msg("stdout", "f", "[$error]: Wrong node definition.");
    exit 1;
}

if ($rollforward_time_of_replay) {
    if (($rollforward_time_of_replay !~ /(\d+)h(\d+)m/i) && ($rollforward_time_of_replay !~ /^(\d+)h*$/i) && ($rollforward_time_of_replay !~ /^(\d+)m$/i)) {
        probe_utils->send_msg("stdout", "f", "Unsupported time format for option '-r'");
        probe_utils->send_msg("stdout", "", "$::USAGE");
        exit 1;
    }
}

if ($performance) {
    if ($performance ne "compact" and $performance ne "phase" and $performance ne "origin") {
        probe_utils->send_msg("stdout", "f", "Unsupported parameter for option '-p'");
        probe_utils->send_msg("stdout", "",  "$::USAGE");
        exit 1;
    }
}

my $rst = do_pre_check($noderange);
if ($debug) {
    print "Dumper macmap--------\n";
    print Dumper \%macmap;
    print "Dumper ipnodemap--------\n";
    print Dumper \%ipnodemap;
    print "installnic = $installnic\n";
}

#if failed to pass pre-check, exit directly
if ($rst){
    probe_utils->send_msg("stdout", "f", "Provison pre-check");
    exit $rst;
}

# record every status's start time and end time for each node
# $node_status_time{$node}{$status}{start_time} = $start_time;
my %node_status_time = () if ($performance);

if ($rollforward_time_of_replay) {
    $monitor = 0;

    my $start_time_of_replay = time();
    my $end_time_of_replay   = $start_time_of_replay;
    if ($rollforward_time_of_replay =~ /(\d+)h(\d+)m/i) {
        $start_time_of_replay -= ($1 * 3600 + $2 * 60)
    } elsif ($rollforward_time_of_replay =~ /^(\d+)h*$/i) {
        $start_time_of_replay -= $1 * 3600;
    } elsif ($rollforward_time_of_replay =~ /^(\d+)m$/) {
        $start_time_of_replay -= $1 * 60;
    }

    $rst = do_replay($noderange, $start_time_of_replay, $end_time_of_replay);
    exit $rst;
}

#if no specific instruction, do monitor by default
$rst = do_monitor($noderange, $maxwaittime);

exit $rst;

#------------------------------------------

=head3
    Description:
        Pre-check some static configuration. such as privision network interface, the definition of node
    Arguments:
        noderange:  The range of node
    Returns:
        0: pass
        1: failed
=cut

#------------------------------------------
sub do_pre_check {
    my $noderange = shift;

    my $rst = 0;    #the return value of current function

    my @error = ();
    my $sub_func_rst = obtain_install_nic(\$installnic, \@error);
    if ($sub_func_rst) {
        probe_utils->send_msg("stdout", "f", "Obtain install NIC in current server");
        probe_utils->send_msg("stdout", "d", "$_") foreach (@error);
    } else {
        probe_utils->send_msg("stdout", "i", "The install NIC in current server is $installnic");
    }
    $rst |= $sub_func_rst;

    @error = ();
    $sub_func_rst = check_noderange($noderange, \@error);
    if ($sub_func_rst) {
        probe_utils->send_msg("stdout", "f", "There is something wrong in node definition");
        probe_utils->send_msg("stdout", "d", "$_") foreach (@error);
    } else {
        probe_utils->send_msg("stdout", "o", "All nodes to be deployed are valid");
    }
    $rst |= $sub_func_rst;

    return $rst;
}

#------------------------------------------

=head3
    Description:
        Obtain the network interface of provision
    Arguments:
        installnic_ref: (output attribute) the reference of scalar which save the provision network interface.
        return_error_ref: (output attribute) the reference of array which save the error information.
    Returns:
        0: success
        1: failed
=cut

#------------------------------------------
sub obtain_install_nic {
    my $installnic_ref   = shift;
    my $return_error_ref = shift;

    my $master_ip_in_site = `lsdef -t site -i master -c |awk -F"=" '{print \$2}'`;
    chomp($master_ip_in_site);
    unless ($master_ip_in_site) {
        push @$return_error_ref, "'master' isn't configured in 'site' table";
        return 1;
    }

    $$installnic_ref = `ip -4 -o a|awk -F"\\\\" '/$master_ip_in_site/ {print \$1}' |awk -F" " '{print \$NF}'`;
    chomp($$installnic_ref);
    if (!$$installnic_ref) {
        push @$return_error_ref, "The value of 'master' in 'site' table is $master_ip_in_site, can't get corresponding network interface in current server";
        return 1;
    }
    return 0;
}


#------------------------------------------

=head3
    Description:
        Check if the definition of all nodes are valid
        If all nodes definition are valid, initialize below global attributes which will be used as a map in "Monitor" or "Replay"
        %macmap, %ipnodemap

    Arguments:
        node_range: node range
    Returns:
        0 : pass
        1 : failed
=cut

#------------------------------------------
sub check_noderange {
    my $node_range = shift;
    my $error_ref  = shift;

    my @cmdoutput = `lsdef $node_range -i ip,mac -c 2>&1`;
    my $rst       = 0;
    my %nodecheckrst;

    foreach (@cmdoutput) {
        chomp($_);
        $_ =~ s/^\s+|\s+$//g;
        if ($_ =~ /^Error: Could not find an object named '(.+)' of type .+/i) {
            $rst = 1;
            push @$error_ref, "Node $1 without node definition";
        } elsif ($_ =~ /(\S+):\s+mac=(.*)/i) {
            my $node = $1;
            my $mac  = $2;
            if ($mac) {
                $nodecheckrst{$node}{"mac"} = $mac;
            } else {
                $rst = 1;
                push @$error_ref, "Node $node without 'mac' attribute definition";
            }
        } elsif ($_ =~ /(\S+):\s+ip=(.*)/i) {
            my $node = $1;
            my $ip   = $2;
            if ($ip) {
                $nodecheckrst{$node}{"ip"} = $ip;
            } else {
                my $nodeip = xCAT::NetworkUtils->getipaddr($node);
                if ($nodeip) {
                    $nodecheckrst{$node}{"ip"} = $nodeip;
                } else {
                    $rst = 1;
                    push @$error_ref, "Node $node without ip definition";
                }
            }
        }
    }

    if (!$rst) {
        foreach my $node (keys %nodecheckrst) {
            my @macs = split(/\|/, $nodecheckrst{$node}{"mac"});
            foreach my $mac (@macs) {

                #[NOTE] don't support 2 adapters in the same network now. TODO

                if ($mac =~ /\!\*NOIP\*/) {
                    $mac =~ s/\!\*NOIP\*//g;
                    $macmap{$mac}{"ip"}   = "NOIP";
                    $macmap{$mac}{"node"} = $node;
                } elsif ($mac =~ /(\w{2}:\w{2}:\w{2}:\w{2}:\w{2}:\w{2})\!(.+)/) {
                    $mac = $1;
                    my $tmp_node = $2;
                    $macmap{$mac}{"node"} = $node;
                    my $tmp_ip = xCAT::NetworkUtils->getipaddr($tmp_node);
                    if ($tmp_ip) {
                        $macmap{$mac}{"ip"}  = $tmp_ip;
                        $ipnodemap{ $nodecheckrst{$node}{"ip"} } = $node;
                    } else {
                        $macmap{$mac}{"ip"} = "NOIP";
                    }
                } else {
                    $macmap{$mac}{"node"} = $node;
                    $macmap{$mac}{"ip"}   = $nodecheckrst{$node}{"ip"};
                    $ipnodemap{ $nodecheckrst{$node}{"ip"} } = $node;
                }
            }
        }
    }

    return $rst;
}

#------------------------------------------

=head3
    Description:
        Initailize a very important hash "%node_state" which will save the state information of every node
    Arguments:
        noderange: (input attribute) The range of node
        node_state_ref: (output attribute) the reference of hash "%node_state"
            The strucuture of  hash "%node_state" are :
                $node_state{<node>}{statehistory}  Array.  save the latest loop provision states
                $node_state{<node>}{done}          Scalar.  the flag of if the node have finished the provision
                $node_state{<node>}{allstatehistory}   Array. save the history states before the latest loop provision. Used in debug mode.
                $node_state{<node>}{log}           Array. save all related logs of node. Used in debug mode.
    Returns:
        NULL
=cut

#------------------------------------------
sub init_node_state {
    my $noderange      = shift;
    my $node_state_ref = shift;

    my @nodes = probe_utils->parse_node_range($noderange);
    foreach my $node (@nodes) {
        @{ $node_state_ref->{$node}{statehistory} } = ();
        %{ $node_state_ref->{$node}{errors} } = ();
        $node_state_ref->{$node}{done} = 0;
    }
}


#------------------------------------------

=head3
    Description:
        Implement the replay feature.
    Arguments:
        noderange : the range of node
        start_time_of_replay: the start time point of scaning log
        end_time_of_replay: the end time point of scaning log

    Returns:
        0: success
        1: failed
=cut

#------------------------------------------
sub do_replay {
    my $noderange            = shift;
    my $start_time_of_replay = shift;
    my $end_time_of_replay   = shift;

    my $rc = 0;

    #handle INT/TERM  signal
    my $terminal = 0;
    $SIG{TERM} = $SIG{INT} = sub {
        $terminal = 1;
    };

    my $timestr = scalar(localtime($start_time_of_replay));
    probe_utils->send_msg("stdout", "d", "Starting to scan logs which are later than '$timestr', please waiting for a while.............");

    my %node_state;
    init_node_state($noderange, \%node_state);
    if ($debug) {
        print "Dumper node_state-------\n";
        print Dumper \%node_state;
    }

    my $log_parse = LogParse->new($verbose, $::REPLAY);
    my @candidate_mn_hostname_in_log = $log_parse->obtain_candidate_mn_hostname_in_log();

    while ($start_time_of_replay < $end_time_of_replay) {
        my @valid_one_second_log_set;
        my $rst = $log_parse->obtain_one_second_logs($start_time_of_replay, \@valid_one_second_log_set);
        if ($rst) {
            probe_utils->send_msg("stdout", "d", "Failed to obtain logs from log files");
            $rc = 1;
            last;
        }

        foreach my $log_ref (@valid_one_second_log_set) {
            dispatch_log_to_handler($log_ref, \@candidate_mn_hostname_in_log, \%node_state);
        }

        $start_time_of_replay = $log_parse->obtain_next_second();

        # receive terminal signal from customer
        if ($terminal) {
            probe_utils->send_msg("stdout", "d", "Get INT or TERM signal!!!");
            probe_utils->send_msg("stdout", "w", "Haven't scaned all valid logs, report based on the logs have been scaned");
            last;
        }
    }
    $log_parse->destory();

    conclusion_report(\%node_state);
    return $rc;
}

#------------------------------------------

=head3
    Description:
        Calculate the provision of every node. offer a report to customer
    Arguments:
        node_state_ref: The reference of hash "%node_state". refer to function "init_node_state" for the structure of "%node_state"
    Returns:
        0: success
        1: failed
=cut

#------------------------------------------
sub conclusion_report {
    my $node_state_ref = shift;

    probe_utils->send_msg("stdout", "", "======================  Summary  =====================");

    if ($debug) {
        print "---->the result of %node_state<------\n";
        print Dumper $node_state_ref;
    }

    if ($verbose) {
        probe_utils->send_msg("stdout", "d", "----------node state history----------");
        foreach my $node (keys %$node_state_ref) {
            my $allhistorystate;
            my $historystate;
            probe_utils->send_msg("stdout", "d", "[$node]:");
            if (@{ $node_state_ref->{$node}{allstatehistory} }) {
                $allhistorystate .= "$::STATE_DESC{$_}=>" foreach (@{ $node_state_ref->{$node}{allstatehistory} });
                $allhistorystate =~ s/=>$//g;
                probe_utils->send_msg("stdout", "d", "Setps executed prior to last provisioning attempt:");
                probe_utils->send_msg("stdout", "d", "$allhistorystate");
            }

            $historystate .= "$::STATE_DESC{$_}=>" foreach (@{ $node_state_ref->{$node}{statehistory} });
            $historystate =~ s/=>$//g;
            probe_utils->send_msg("stdout", "d", "Steps executed for last provisioning attempt:");
            probe_utils->send_msg("stdout", "d", "$historystate");
        }
        probe_utils->send_msg("stdout", "d", "--------------------------------------");
    }

    my %failed_node;
    foreach my $node (keys %$node_state_ref) {
        my $stop_stage = 0;

        my $start_rpower   = 0;
        my $isntalling     = 0;
        my $postbootscript = 0;
        my $completed      = 0;

        #calculate node provision result
        #the max value of all state is the final stop stage
        foreach (@{ $node_state_ref->{$node}{statehistory} }) {
            $stop_stage     = $_ if ($stop_stage < $_);
            $start_rpower   = 1  if ($_ == $::STATE_POWER_ON);
            $isntalling     = 1  if ($_ == $::STATE_INSTALLING);
            $postbootscript = 1  if ($_ == $::STATE_POSTBOOTSCRIPT);
            $completed      = 1  if ($_ == $::STATE_COMPLETED)
        }

        # Cover limited non-privision error when replay
        # 1 if power on target node successfully and there is 'running postbootscript' in node state history, but without "installing" state,
        #   It is very possible to just do reboot process
        # 2 if there isn't reboot operation for target node during the rollback time window
        #   That means there isn't provision process happened

        unless ($monitor) {
            if (! $start_rpower) {
                $failed_node{$node}{non_provision_prediction} = "Without provision process during rollback time window";
                next;
            } elsif (!$isntalling && $postbootscript && !$completed) {
                $failed_node{$node}{non_provision_prediction} = "Target node just reboot from disk";
                next;
            }
        }

        # if not completed or completed but with postscript error, add node to failed_node hash
        if ($stop_stage != $::STATE_COMPLETED or @{ $node_state_ref->{$node}{errors}{$::STATE_POSTSCRIPT} }) {
            $failed_node{$node}{provision_stop_point} = $stop_stage;
        }
    }

    my $is_success = 1;
    if (%failed_node) {
        $is_success = 0;
        my $failed_node_num = keys %failed_node;
        if ($failed_node_num > 1) {
            probe_utils->send_msg("stdout", "d", "There are $failed_node_num node provision failures");
        } elsif ($failed_node_num == 1) {
            probe_utils->send_msg("stdout", "d", "There is $failed_node_num node provision failures");
        }

        foreach my $node (keys %failed_node) {
            if ($failed_node{$node}{non_provision_prediction}) {
                probe_utils->send_msg("stdout", "f", "$node : $failed_node{$node}{non_provision_prediction}");
            } else {
                my $node_length = length($node);
                my $space_str = " " x ($length_node + 2);
                # if stop at stage before postscript, means there is error at current stage, print error message
                probe_utils->send_msg("stdout", "f", "$node : stop at stage '$::STATE_DESC{$failed_node{$node}{provision_stop_point}}'");
                if ($failed_node{$node}{provision_stop_point} < $::STATE_POSTSCRIPT) {
                    foreach my $node_error (@{ $node_state_ref->{$node}{errors}{$failed_node{$node}{provision_stop_point}} }) {
                        probe_utils->send_msg("stdout", "d", "$space_str $node_error");
                    }
                } else {
                    # if stop at postscript or after postscript, check whether has error from postscript, if has print
                    for (my $stage = $::STATE_POSTSCRIPT; $stage <= $::STATE_COMPLETED; $stage++) {
                        foreach my $node_error (@{ $node_state_ref->{$node}{errors}{$stage} }) {
                             probe_utils->send_msg("stdout", "d", "$space_str $node_error");
                        }
                    }
                }
            }
        }
    } else {
        probe_utils->send_msg("stdout", "o", "All nodes provisioned successfully");
    }

    performance_calculation($is_success) if ($performance);

    return 0;
}

#------------------------------------------

=head3
    Description:
        Calculate the performance of provision (for each node)
    Arguments:
        performance: compact: calculate how much time spent for provision
                     phase: calculate how much time spent for each status (DHCP, INSTALL, POSTSCRIPTS, POSTBOOTSCRIPTS)
                     origin : show time point for each status
                     reserve: reserve for other type
    Returns:
=cut

#------------------------------------------
sub performance_calculation {
    my $is_success = shift;
    #print Dumper(%node_status_time);

    return if (!%node_status_time);

    # Currently, only diskful is supported
    my $provision_type = $::DISKFUL;

    my @status_for_time = ();
    my $isnull = 0;
    my @time_content;
    # print table's first line
    # @status_for_time: the status that needed to calculate time

    my @title_lines = (
        [qw/NODE ELAPSED/],
        [qw/NODE SVRBOOT INSTALL POST POSTBOOT ELAPSED/],
        [qw/NODE RPOWER DHCP BOOTLOADER KERNEL INITRD INSTALL POST POSTBOOT COMPLETED/],
        [qw/NODE RPOWER DHCP BOOTLOADER KERNEL INITRD NETBOOTING ROOTIMG POSTBOOT COMPLETED/],
        [qw/NODE DHCP BOOTLOADER KERNEL INITRD NETBOOTING ROOTIMG POSTBOOT ELAPSED/]);

    if ($performance eq "compact") {
        push @time_content, "Provision Time";
        push @time_content, $title_lines[0];
        @status_for_time = ($::STATE_COMPLETED);
    }

    if ($performance eq "phase") {
        push @time_content, "Time for Phases";
        push @time_content, $title_lines[1];
        @status_for_time = ($::STATE_DHCP, $::STATE_INSTALLRPM, $::STATE_POSTSCRIPT, $::STATE_POSTBOOTSCRIPT, $::STATE_COMPLETED);
    }

    if ($performance eq "origin") {
        push @time_content, "Start Time for Stage";
        if ($provision_type == $::DISKFUL){
            push @time_content, $title_lines[2];
            @status_for_time = ($::STATE_POWER_ON, $::STATE_DHCP, $::STATE_BOOTLODER, $::STATE_KERNEL, $::STATE_INITRD, $::STATE_INSTALLRPM, $::STATE_POSTSCRIPT, $::STATE_POSTBOOTSCRIPT, $::STATE_COMPLETED);
        } else { # reserved for diskless
            push @time_content, $title_lines[3];
            @status_for_time = ($::STATE_POWER_ON, $::STATE_DHCP, $::STATE_BOOTLODER, $::STATE_KERNEL, $::STATE_INITRD, $::STATE_NETBOOTING, $::STATE_ROOTIMG, $::STATE_POSTBOOTSCRIPT, $::STATE_COMPLETED);
        }
    }

    if ($performance eq "reserve") {
        push @time_content, $title_lines[4];
        @status_for_time = ($::STATE_DHCP, $::STATE_BOOTLODER, $::STATE_KERNEL, $::STATE_INITRD, $::STATE_NETBOOTING, $::STATE_ROOTIMG, $::STATE_POSTBOOTSCRIPT, $::STATE_COMPLETED);
    }

    # calculate time for each node and status
    foreach my $node (keys %node_status_time) {

        my @timeinfo = ();
        push @timeinfo, $node;

        if ($performance eq "origin") {
            foreach my $status (@status_for_time) {
                if ($node_status_time{$node}{$status}{time_point}) {
                    if ($status == $::STATE_DHCP or $status == $::STATE_BOOTLODER) {
                        # If there is no start time of kernel, means osdeploy start after kernel download
                        if (!$node_status_time{$node}{$::STATE_KERNEL}{start_time}) {
                            push @timeinfo, "NULL";
                            $isnull = 1;
                        # If there is start time of kernel, but dhcp or bootloader's time value larger than kernel. It means dhcp and bootloader is after kernel, not the value we wanted.
                        } elsif ($node_status_time{$node}{$status}{start_time} > $node_status_time{$node}{$::STATE_KERNEL}{start_time}) {
                            push @timeinfo, "NULL";
                            $isnull = 1;
                        } else {
                            push @timeinfo, $node_status_time{$node}{$status}{time_point};
                        }
                    } elsif ($status >= $::STATE_INSTALLRPM and (!$node_status_time{$node}{$status-1}{start_time} and !$node_status_time{$node}{$status-1}{end_time})) {
                        push @timeinfo, "NULL";
                        $isnull = 1;
                    } else {
                        push @timeinfo, $node_status_time{$node}{$status}{time_point};
                    }
                } else {
                    push @timeinfo, "NULL";
                    $isnull = 1;
                }
            }
            push @time_content, [ @timeinfo ];
            next;
        }

        # get the start time and end time for each step
        foreach my $status (@status_for_time) {
            my $tmp_status;
            my $tmp_detail_status;
            if ($performance eq "phase") {
                # when phase, if the status is DHCP, use power on time as it's start time
                $tmp_detail_status = $::STATE_DHCP;
            } else {
                # if not phase, power on time is the start time for each steps
                $tmp_detail_status = $::STATE_COMPLETED;
            }

            if ($status <= $tmp_detail_status or $status == $::STATE_COMPLETED) {
                $tmp_status = $::STATE_POWER_ON;
            } else {
                $tmp_status = $status;
            }

            my $tmp_start_time = $node_status_time{$node}{$tmp_status}{start_time};
            my $tmp_end_time = $node_status_time{$node}{$status}{end_time};
            $tmp_end_time = $node_status_time{$node}{$status}{start_time} if ($status != $::STATE_DHCP and $status != $::STATE_INSTALLRPM and $status != $::STATE_POSTSCRIPT and $status != $::STATE_POSTBOOTSCRIPT and $node_status_time{$node}{$status}{start_time});

            if ($tmp_start_time && $tmp_end_time) {
                if ($status >= $::STATE_INSTALLRPM and (!$node_status_time{$node}{$status-1}{start_time} and !$node_status_time{$node}{$status-1}{end_time})) {
                    push @timeinfo, "NULL";
                    $isnull = 1;
                } else {
                    push @timeinfo, probe_utils->convert_second_to_time($tmp_end_time - $tmp_start_time);
                }
            } else {
                push @timeinfo, "NULL";
                $isnull = 1;
            }
        }
        push @time_content, [ @timeinfo ];
    }

    probe_utils->print_table(\@time_content, 1);

    if ($performance eq "phase") {
        print "SVRBOOT  : Time from rpower to acquire ip\n";
        print "INSTALL  : Time to download all rpm/deb packages\n";
        print "POST     : Postscript execution time\n";
        print "POSTBOOT : Postbootscript execution time\n";
        print "ELAPSED  : Total provision time\n";
    }

    if ($isnull and $is_success) {
        my $command_input = "xcatprobe -w $program_name";
        $command_input .= " -n $noderange" if ($noderange);
        $command_input .= " -p $performance";
        $command_input .= " -V" if ($verbose);
        my $osdeploy_end_time = time();
        my $time_for_replay = $osdeploy_end_time - $osdeploy_start_time;
        my $time_hour = ($time_for_replay - $time_for_replay%3600) / 3600 + 1;
        $command_input .= " -r $time_hour" . "h";
        probe_utils->send_msg("stdout", "", "Did not get correct time, please run '$command_input' to get correct time");
    }
}

#------------------------------------------

=head3
    Description:
        Implement the monitor feature
    Arguments:
        noderange : the range of node
        maxwaittime:  the max waiting time for monitor.
    Returns:
        0: success
        1: failed
=cut

#------------------------------------------
sub do_monitor {
    my $noderange   = shift;
    my $maxwaittime = shift;

    my $rst      = 0;
    my $terminal = 0;

    $osdeploy_start_time = time() if ($performance);

    $SIG{TERM} = $SIG{INT} = sub {
        $terminal = 1;
    };

    my $startline =
      "-------------------------------------------------------------
Start capturing every message during OS provision process....
-------------------------------------------------------------
";
    probe_utils->send_msg("stdout", "", "$startline");

    my @openfilepids;
    my @openfilefds;
    my %fd_filetype_map;

    {    #a very important brace to hold a code block
        my $log_parse         = LogParse->new($verbose, $::MONITOR);
        my $candidate_log_ref = $log_parse->obtain_log_file_list();

        #open candidate log file to obtain realtime log
        if (%$candidate_log_ref) {
            foreach my $logfile (keys %$candidate_log_ref) {
                my $pid;
                my $fd;
                if (!($pid = open($fd, "tail -f -n 0 $candidate_log_ref->{$logfile}{file} 2>&1 |"))) {
                    probe_utils->send_msg("stdout", "f", "Can't open $candidate_log_ref->{$logfile}{file} to get logs");
                    $rst = 1;
                    last;
                } else {
                    push @openfilepids, $pid;
                    push @openfilefds,  $fd;
                    $fd_filetype_map{$fd} = $candidate_log_ref->{$logfile}{type};
                }
            }
        } else {
            probe_utils->send_msg("stdout", "f", "There are no valid log files to be scanned");
            $rst = 1;
        }

        last if ($rst);

        my %node_state;
        init_node_state($noderange, \%node_state);

        my $select = new IO::Select;
        $select->add(\*$_) foreach (@openfilefds);
        $| = 1;

        my @hdls;
        my $starttime = time();
        my @candidate_mn_hostname_in_log = $log_parse->obtain_candidate_mn_hostname_in_log();
        my $log_content_ref_last;

        # Loop forever, reading each log file
        for (; ;) {
            if (@hdls = $select->can_read(0)) {
                foreach my $hdl (@hdls) {
                    my $line = "";
                    chomp($line = <$hdl>);
                    my $log_content_ref = $log_parse->obtain_log_content($fd_filetype_map{$hdl}, $line);
                    if ($log_content_ref->{label} == $::LOGLABEL_XCAT) {
                        # If reading computes or cluster log files, try to eliminate duplicated lines
                        unless (($log_content_ref_last->{time_record} eq $log_content_ref->{time_record}) && 
                                ($log_content_ref_last->{sender} eq $log_content_ref->{sender}) && 
                                ($log_content_ref_last->{msg} eq $log_content_ref->{msg})) {
                            dispatch_log_to_handler($log_content_ref, \@candidate_mn_hostname_in_log, \%node_state);
                        }
                        # Save messages details for later duplicate detection
                        $log_content_ref_last = { %$log_content_ref };
                    }
                    else {
                        dispatch_log_to_handler($log_content_ref, \@candidate_mn_hostname_in_log, \%node_state);
                    }
                }
            }

            # stop reading log at below 3 scenarios
            # 1 receive terminal signal from customer
            if ($terminal) {
                probe_utils->send_msg("stdout", "d", "Get INT or TERM signal from STDIN");
                last;

                # 2 all node have finished the provision
            } elsif (all_monitor_node_done(\%node_state)) {
                probe_utils->send_msg("stdout", "o", "All nodes specified to monitor, have finished OS provision process");
                last;

                # 3 exceed the max waiting time
            } elsif (time() - $starttime > ($maxwaittime * 60)) {
                probe_utils->send_msg("stdout", "i", "$maxwaittime minutes have expired, stop monitoring");
                last;
            } else {
                sleep 0.01;
            }
        }

        conclusion_report(\%node_state);
        $log_parse->destory();
    }

    # close all running sub process
    my $existrunningpid = 0;
    $existrunningpid = 1 if (@openfilepids);
    my $trytime = 0;
    while ($existrunningpid) {

        #send terminal signal to all running process at same time
        if ($try < 5) {    #try INT 5 up to 5 times
            foreach my $pid (@openfilepids) {
                kill 'INT', $pid if ($pid);
            }
        } elsif ($try < 10) {    #try TERM 5 up to 5 times
            foreach my $pid (@openfilepids) {
                kill 'TERM', $pid if ($pid);
            }
        } else {                 #try KILL 1 time
            foreach my $pid (@openfilepids) {
                kill 'KILL', $pid if ($pid);
            }
        }
        ++$try;
        sleep 1;

        #To check how many process exit, set the flag of exited process to 0
        for (my $i = 0 ; $i <= $#openfilepids ; $i++) {
            $openfilepids[$i] = 0 if (waitpid($openfilepids[$i], WNOHANG));
        }

        #To check if there are processes still running, if there are, try kill again in next loop
        $existrunningpid = 0;
        $existrunningpid |= $_ foreach (@openfilepids);

        #just try 10 times, if still can't kill some process, give up
        if ($try > 10) {
            my $leftpid;
            foreach my $pid (@openfilepids) {
                $leftpid .= "$pid " if ($pid);
            }
            probe_utils->send_msg("stdout", "d", "Can't stop process $leftpid, please handle manually.");
            last;
        }
    }

    # close all openning file descriptors
    close($_) foreach (@openfilefds);

    return $rst;
}

#------------------------------------------

=head3
    Description:
        Check if all node have been finished the provision process
    Arguments:
        node_state_ref: The reference of hash "%node_state". refer to function "init_node_state" for the structure of "%node_state"
    Returns:
        0: success
        1: failed
=cut

#------------------------------------------
sub all_monitor_node_done {
    my $node_state_ref = shift;
    my $done           = 1;

    foreach my $node (keys %$node_state_ref) {
        if ($node_state_ref->{$node}{done} == 0) {
            $done = 0;
            last;
        }
    }

    return $done;
}

#------------------------------------------

=head3
    Description:
        Handle one line DHCP log
    Arguments:
        log_ref: (input attribute) the reference of hash which save one line dhcp log.
        node_state_ref: (output attribute), the reference of hash "%node_state". refer to function "init_node_state" for the structure of "%node_state"
    Returns:
        NULL
=cut

#------------------------------------------
sub handle_dhcp_msg {
    my $log_ref        = shift;
    my $node_state_ref = shift;
    if ($log_ref->{msg} =~ /DHCPDISCOVER\s+from\s+(.+)\s+via\s+([^:]+)(.*)/i) {
        my $mac = $1;
        my $nic = $2;

        if (exists $macmap{$mac}) {
            my $node   = $macmap{$mac}{"node"};
            my $record = "Receive DHCPDISCOVER via $nic";
            probe_utils->send_msg("stdout", "d", "[$node] $log_ref->{time_record} $record") if ($monitor);
            push(@{ $node_state_ref->{$node}{log} }, $log_ref->{msg}) if ($debug);
        }
    } elsif ($log_ref->{msg} =~ /DHCPOFFER\s+on\s+(.+)\s+to\s+(.+)\s+via\s+(.+)/i) {
        my $ip  = $1;
        my $mac = $2;
        my $nic = $3;

        if (exists $macmap{$mac}) {
            my $node   = $macmap{$mac}{"node"};
            my $record = "Send DHCPOFFER on $ip back to $mac via $nic";
            probe_utils->send_msg("stdout", "d", "[$node] $log_ref->{time_record} $record") if ($monitor);
            push(@{ $node_state_ref->{$node}{log} }, $log_ref->{msg}) if ($debug);
        }
    } elsif ($log_ref->{msg} =~ /DHCPREQUEST\s+for\s+(.+)\s+[\(\)0-9\.]*\s*from\s+(.+)\s+via\s+(.+)/) {
        my $ip  = $1;
        my $mac = $2;
        my $nic = $3;

        if (exists $macmap{$mac}) {
            my $node   = $macmap{$mac}{"node"};
            my $record = $log_ref->{msg};
            probe_utils->send_msg("stdout", "d", "[$node] $log_ref->{time_record} $record") if ($monitor);
            push(@{ $node_state_ref->{$node}{log} }, $log_ref->{msg}) if ($debug);
        }
    } elsif ($log_ref->{msg} =~ /DHCPACK\s+on\s+(.+)\s+to\s+(.+)\s+via\s+(.+)/) {
        my $ip  = $1;
        my $mac = $2;
        my $nic = $3;

        if (exists $macmap{$mac}) {
            my $node   = $macmap{$mac}{"node"};
            my $record = "Send DHCPACK on $ip back to $mac via $nic";
            probe_utils->send_msg("stdout", "d", "[$node] $log_ref->{time_record} $record") if ($monitor);
            push(@{ $node_state_ref->{$node}{log} }, $log_ref->{msg}) if ($debug);

            if ($macmap{$mac}{"ip"} != "NOIP" and $macmap{$mac}{"ip"} != $ip) {
                my $warn_msg = "The ip($ip) assigned to $mac via DHCP is different from the ip($macmap{$mac}{'ip'}) in node definition.";

                #probe_utils->send_msg("stdout", "w", "$warn_msg") if ($monitor);
                probe_utils->send_msg("stdout", "w", "$warn_msg");
            }

            $ipnodemap{$ip} = $node;
            set_node_state($node_state_ref, $node, $::STATE_DHCP);
            if ($performance and !$node_status_time{$node}{$::STATE_DHCP}{end_time}) {
                $node_status_time{$node}{$::STATE_DHCP}{time_point} = $log_ref->{time_record};
                $node_status_time{$node}{$::STATE_DHCP}{end_time} = $log_ref->{time};
            }
        }
    } elsif ($log_ref->{msg} =~ /BOOTREQUEST\s+from\s+(.+)\s+via\s+([^:]+)(.*)/) {
        my $mac = $1;
        my $nic = $2;
        if (exists $macmap{$mac}) {
            my $node   = $macmap{$mac}{"node"};
            my $record = "Receive BOOTREQUEST from $mac via $nic";
            probe_utils->send_msg("stdout", "d", "[$node] $log_ref->{time_record} $record") if ($monitor);
            push(@{ $node_state_ref->{$node}{log} }, $log_ref->{msg}) if ($debug);
        }
    } elsif ($log_ref->{msg} =~ /BOOTREPLY\s+for\s+(.+)\s+to\s+.+(\w\w:\w\w:\w\w:\w\w:\w\w:\w\w).+via\s+(.+)/) {
        my $ip  = $1;
        my $mac = $2;
        my $nic = $3;

        if (exists $macmap{$mac}) {
            my $node   = $macmap{$mac}{"node"};
            my $record = "Send BOOTREPLY on $ip back to $mac via $nic";
            probe_utils->send_msg("stdout", "d", "[$node] $log_ref->{time_record} $record") if ($monitor);
            push(@{ $node_state_ref->{$node}{log} }, $log_ref->{msg}) if ($debug);

            if ($macmap{$mac}{"ip"} != "NOIP" and $macmap{$mac}{"ip"} != $ip) {
                my $warn_msg = "The ip($ip) assigned to $mac via DHCP is different from the ip($macmap{$mac}{'ip'}) in node definition.";
                probe_utils->send_msg("stdout", "w", "$warn_msg");
            }

            $ipnodemap{$ip} = $node;
            set_node_state($node_state_ref, $node, $::STATE_DHCP);
            if ($performance and !$node_status_time{$node}{$::STATE_DHCP}{end_time}) {
                $node_status_time{$node}{$::STATE_DHCP}{end_time} = $log_ref->{time};
                $node_status_time{$node}{$::STATE_DHCP}{time_point} = $log_ref->{time_record};
            }
        }
    }
}

#------------------------------------------

=head3
    Description:
        Handle one line TFTP log
    Arguments:
        log_ref: (input attribute) the reference of hash which save one line TFTP log.
        node_state_ref: (output attribute), the reference of hash "%node_state". refer to function "init_node_state" for the structure of "%node_state"
    Returns:
        NULL
=cut

#------------------------------------------
sub handle_tftp_msg {
    my $log_ref        = shift;
    my $node_state_ref = shift;

    if ($log_ref->{msg} =~ /RRQ\s+from\s+(.+)\s+filename\s+(.+)/i) {
        my $ip     = $1;
        my $file   = $2;
        my $record = "Via TFTP download $file";
        if (exists($node_state_ref->{ $ipnodemap{$ip} })) {
            probe_utils->send_msg("stdout", "d", "[$ipnodemap{$ip}] $log_ref->{time_record} $record") if ($monitor);
            push(@{ $node_state_ref->{ $ipnodemap{$ip} }{log} }, $log_ref->{msg}) if ($debug);

            if ($file =~ /xcat\/xnba.*/i or $file =~ /\/boot\/grub2\/powerpc-ieee1275\//i or $file =~ /\/yb\/node\/yaboot\-/i) {
                set_node_state($node_state_ref, $ipnodemap{$ip}, $::STATE_BOOTLODER);
                if ($performance) {
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_BOOTLODER}{start_time} = $log_ref->{time} if (!$node_status_time{$ipnodemap{$ip}}{$::STATE_BOOTLODER}{start_time});
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_BOOTLODER}{time_point} = $log_ref->{time_record} if (!$node_status_time{$ipnodemap{$ip}}{$::STATE_BOOTLODER}{time_point});
                }
            } elsif ($file =~ /vmlinuz|inst64|linux/) {
                set_node_state($node_state_ref, $ipnodemap{$ip}, $::STATE_KERNEL);
                if ($performance) {
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_KERNEL}{start_time} = $log_ref->{time};
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_KERNEL}{time_point} = $log_ref->{time_record};
                }
            } elsif ($file =~ /initrd/i) {
                set_node_state($node_state_ref, $ipnodemap{$ip}, $::STATE_INITRD);
                if ($performance) {
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_INITRD}{start_time} = $log_ref->{time};
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_INITRD}{time_point} = $log_ref->{time_record};
                }
            }
        }
    }
}


#------------------------------------------

=head3
    Description:
        Handle one line HTTP log
    Arguments:
        log_ref: (input attribute) the reference of hash which save one line HTTP log.
        node_state_ref: (output attribute), the reference of hash "%node_state". refer to function "init_node_state" for the structure of "%node_state"
    Returns:
        NULL
=cut

#------------------------------------------
sub handle_http_msg {
    my $log_ref        = shift;
    my $node_state_ref = shift;
    my $ip             = $log_ref->{sender};

    if (exists($node_state_ref->{ $ipnodemap{$ip} })) {

        if ($log_ref->{msg} =~ /"GET\s+(.+)\s+HTTP.+" (\d+)/ or $log_ref->{msg} =~ /"HEAD\s+(.+)\s+HTTP.+" (\d+)/) {
            my $file   = $1;
            my $http_code = $2;
            my $record = "Via HTTP get $file";

            probe_utils->send_msg("stdout", "d", "[$ipnodemap{$ip}] $log_ref->{time_record} $record") if ($monitor);
            push(@{ $node_state_ref->{ $ipnodemap{$ip} }{log} }, $log_ref->{msg}) if ($debug);

            if ($file =~ /vmlinuz|inst64/i or ($file =~ /linux/i and $file =~ /osimage/i)) {
                set_node_state($node_state_ref, $ipnodemap{$ip}, $::STATE_KERNEL);
                if ($performance) {
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_KERNEL}{start_time} = $log_ref->{time};
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_KERNEL}{time_point} = $log_ref->{time_record};
                }
                push (@{ $node_state_ref->{ $ipnodemap{$ip} }{errors}{$::STATE_KERNEL} }, "$record failed with $http_code") if ($http_code >= 400);
            } elsif ($file =~ /initrd/i and $file =~ /osimage/i) {
                set_node_state($node_state_ref, $ipnodemap{$ip}, $::STATE_INITRD);
                if ($performance) {
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_INITRD}{start_time} = $log_ref->{time};
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_INITRD}{time_point} = $log_ref->{time_record};
                }
                push (@{ $node_state_ref->{ $ipnodemap{$ip} }{errors}{$::STATE_INITRD} }, "$record failed with $http_code") if ($http_code >= 400);
            } elsif (($file =~ /^\/install\/autoinst\//i) and ($file !~ /getinstdisk$/i) and ($file !~ /\.pre$/i) and ($file !~ /\.post$/i)) {
                set_node_state($node_state_ref, $ipnodemap{$ip}, $::STATE_KICKSTART);
                if ($performance) {
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_KICKSTART}{start_time} = $log_ref->{time};
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_KICKSTART}{time_point} = $log_ref->{time_record};
                }
                push (@{ $node_state_ref->{ $ipnodemap{$ip} }{errors}{$::STATE_KICKSTART} }, "$record failed with $http_code") if ($http_code >= 400);
            } elsif ($file =~ /\.deb$/i or $file =~ /\/Packages\/.+\.rpm$/ or $file =~ /\/suse\/noarch\/.+\.rpm$/i) {
                set_node_state($node_state_ref, $ipnodemap{$ip}, $::STATE_INSTALLRPM);
                if ($performance) {
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_INSTALLRPM}{end_time} = $log_ref->{time};
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_INSTALLRPM}{start_time} =  $log_ref->{time}  unless ( $node_status_time{$ipnodemap{$ip}}{$::STATE_INSTALLRPM}{start_time} );
                    $node_status_time{$ipnodemap{$ip}}{$::STATE_INSTALLRPM}{time_point} = $log_ref->{time_record} unless ( $node_status_time{$ipnodemap{$ip}}{$::STATE_INSTALLRPM}{time_point} );
                }
                push (@{ $node_state_ref->{ $ipnodemap{$ip} }{errors}{$::STATE_INSTALLRPM} }, "$record failed with $http_code") if ($http_code >= 400);
            } elsif ($file =~ /rootimg/) {
                 set_node_state($node_state_ref, $ipnodemap{$ip}, $::STATE_ROOTIMG);
                 if ($performance) {
                     $node_status_time{$ipnodemap{$ip}}{$::STATE_ROOTIMG}{start_time} = $log_ref->{time};
                     $node_status_time{$ipnodemap{$ip}}{$::STATE_ROOTIMG}{time_point} = $log_ref->{time_record};
                 }
            }
        }
    }
}

#------------------------------------------

=head3
    Description:
        Handle one line log comes from cluster.log
    Arguments:
        log_ref: (input attribute) the reference of hash which save one line log comes from cluster.log.
        node_state_ref: (output attribute), the reference of hash "%node_state". refer to function "init_node_state" for the structure of "%node_state"
    Returns:
        NULL
=cut

#------------------------------------------
sub handle_cluster_msg {
    my $log_ref        = shift;
    my $node_state_ref = shift;

    my $log_msg = $log_ref->{msg};
    my @split_log = split(/\s+/, $log_msg);

    # As xcat log message will in both messages.log and cluster.log, need to filter one to avoid the duplication
    if ($split_log[1] eq "xCAT:" && $split_log[2] eq "Allowing") {
        my $command     = $split_log[3];
        my $nodes_str   = $split_log[5];
        my $sub_command = $split_log[6];

        if ($command eq "rinstall" or $command eq "rnetboot" or ($command eq "rpower" and $sub_command =~ /on|boot|reset/) or ($command eq "xdsh" and $log_msg =~ /reboot|shutdown -r/)) {
            my @nodes = probe_utils->parse_node_range($nodes_str);
            foreach my $node (@nodes) {
                if (exists $node_state_ref->{$node}) {
                    probe_utils->send_msg("stdout", "d", "[$node] $log_ref->{time_record} Use command $command to reboot node $node") if ($monitor);
                    push(@{ $node_state_ref->{$node}{log} }, $log_ref->{msg}) if ($debug);
                    set_node_state($node_state_ref, $node, $::STATE_POWER_ON);
                    if ($performance) {
                        $node_status_time{$node}{$::STATE_POWER_ON}{start_time} = $log_ref->{time};
                        $node_status_time{$node}{$::STATE_POWER_ON}{time_point} = $log_ref->{time_record};
                    }
                }
            }
        }
    } elsif ($log_ref->{msg} =~ /INFO xcat.updatestatus - (.+):\s+changing status=(.+)/) {
        my $nodes  = $1;
        my $status = $2;
        my $record = "Node status is changed to $status";
        my @split_node = split(" ", $nodes);

        foreach my $node (@split_node) {
            if (exists $node_state_ref->{$node}) {
                probe_utils->send_msg("stdout", "d", "[$node] $log_ref->{time_record} $record") if ($monitor);
                push(@{ $node_state_ref->{$node}{log} }, $log_ref->{msg}) if ($debug);

                if ($status eq "installing") {
                    set_node_state($node_state_ref, $node, $::STATE_INSTALLING);
                    if ($performance) {
                        $node_status_time{$node}{$::STATE_INSTALLING}{start_time} = $log_ref->{time};
                        $node_status_time{$node}{$::STATE_INSTALLING}{time_point} = $log_ref->{time_record};
                    }
                } elsif ($status eq "powering-on") {
                    set_node_state($node_state_ref, $node, $::STATE_POWERINGON);
                    if ($performance) {
                        $node_status_time{$node}{$::STATE_POWERINGON}{start_time} = $log_ref->{time};
                        $node_status_time{$node}{$::STATE_POWERINGON}{time_point} = $log_ref->{time_record};
                    }
                } elsif ($status eq "booting") {
                    set_node_state($node_state_ref, $node, $::STATE_BOOTING);
                    if ($performance) {
                        $node_status_time{$node}{$::STATE_BOOTING}{start_time} = $log_ref->{time};
                        $node_status_time{$node}{$::STATE_BOOTING}{time_point} = $log_ref->{time_record};
                    }
                } elsif ($status eq "netbooting") {
                    set_node_state($node_state_ref, $node, $::STATE_NETBOOTING);
                    if ($performance) {
                        $node_status_time{$node}{$::STATE_NETBOOTING}{start_time} = $log_ref->{time};
                        $node_status_time{$node}{$::STATE_NETBOOTING}{time_point} = $log_ref->{time_record};
                    }
                } elsif ($status eq "failed") {
                    $node_state_ref->{$node}{done} = 1;
                }
            }
        }
    }
}

#------------------------------------------

=head3
    Description:
        Handle one line log comes from computes.log
    Arguments:
        log_ref: (input attribute) the reference of hash which save one line log comes from computes.log.
        node_state_ref: (output attribute), the reference of hash "%node_state". refer to function "init_node_state" for the structure of "%node_state"
    Returns:
        NULL
=cut

#------------------------------------------
sub handle_compute_msg {
    my $log_ref        = shift;
    my $node_state_ref = shift;
    my $node           = $log_ref->{sender};

    if (exists $node_state_ref->{$node}) {
        probe_utils->send_msg("stdout", "d", "[$node] $log_ref->{time_record} $log_ref->{msg}") if ($monitor);
        push(@{ $node_state_ref->{$node}{log} }, $log_ref->{msg}) if ($debug);
        if ($log_ref->{msg} =~ /Running postscript:/i) {
            set_node_state($node_state_ref, $node, $::STATE_POSTSCRIPT);
            if ($performance) {
                $node_status_time{$node}{$::STATE_POSTSCRIPT}{start_time} = $log_ref->{time} unless ($node_status_time{$node}{$::STATE_POSTSCRIPT}{start_time});
                $node_status_time{$node}{$::STATE_POSTSCRIPT}{time_point} = $log_ref->{time_record} unless ($node_status_time{$node}{$::STATE_POSTSCRIPT}{time_point});
            }
        } elsif ($log_ref->{msg} =~ /postscript (.+) return with (\d+)/) {
            my $script_name = $1;
            my $return_code = $2;
            if ($return_code != 0) {
                my $error_str = "postscript $script_name return with $return_code";
                # when monitor, will show 2 same messages, so filter to show only one
                unless (grep {$_ eq $error_str} @{ $node_state_ref->{$node}{errors}{$::STATE_POSTSCRIPT} }) {
                    push @{ $node_state_ref->{$node}{errors}{$::STATE_POSTSCRIPT} }, $error_str;
                }
            }
            $node_status_time{$node}{$::STATE_POSTSCRIPT}{end_time} = $log_ref->{time} if ($performance);
        } elsif ($log_ref->{msg} =~ /Running postbootscript:/i) {
            set_node_state($node_state_ref, $node, $::STATE_POSTBOOTSCRIPT);
            if ($performance) {
                $node_status_time{$node}{$::STATE_POSTBOOTSCRIPT}{start_time} = $log_ref->{time} unless ($node_status_time{$node}{$::STATE_POSTBOOTSCRIPT}{start_time});
                $node_status_time{$node}{$::STATE_POSTBOOTSCRIPT}{time_point} = $log_ref->{time_record} unless ($node_status_time{$node}{$::STATE_POSTBOOTSCRIPT}{time_point});
            }
        } elsif ($log_ref->{msg} =~ /postbootscript (.+) return with (\d+)/) {
            my $script_name = $1;
            my $return_code = $2;
            if ($return_code != 0) {
                my $error_str = "postbootscript $script_name return with $return_code";
                # when monitor, will show 2 same messages, so filter to show only one
                unless (grep {$_ eq $error_str} @{ $node_state_ref->{$node}{errors}{$::STATE_POSTBOOTSCRIPT} }) {
                    push @{ $node_state_ref->{$node}{errors}{$::STATE_POSTBOOTSCRIPT} }, $error_str;
                }
            }
            $node_status_time{$node}{$::STATE_POSTBOOTSCRIPT}{end_time} = $log_ref->{time} if ($performance);
        } elsif ($log_ref->{msg} =~ /provision completed/) {
            set_node_state($node_state_ref, $node, $::STATE_COMPLETED);
            $node_state_ref->{$node}{done} = 1;
            probe_utils->send_msg("stdout", "o", "[$node] $log_ref->{time_record} provision completed") if ($monitor);
            if ($performance) {
                $node_status_time{$node}{$::STATE_COMPLETED}{start_time} = $log_ref->{time};
                $node_status_time{$node}{$::STATE_COMPLETED}{time_point} = $log_ref->{time_record};
            }
        }
    }
}

#------------------------------------------

=head3
    Description:
        Dispatch log to related handler
    Arguments:
        log_ref: (input attribute) the reference of hash which save one line log comes from computes.log.
        candidate_mn_hostname_in_log_ref: (input attribute) The reference of array which save the candidate host name of MN
        node_state_ref: (output attribute), the reference of hash "%node_state". refer to function "init_node_state" for the structure of "%node_state"
    Returns:
        NULL
=cut

#------------------------------------------
sub dispatch_log_to_handler {
    my $log_ref                          = shift;
    my $candidate_mn_hostname_in_log_ref = shift;
    my $node_state_ref                   = shift;

    if ($log_ref->{label} == $::LOGLABEL_DHCPD) {
        handle_dhcp_msg($log_ref, $node_state_ref);
    } elsif ($log_ref->{label} == $::LOGLABEL_TFTP) {
        handle_tftp_msg($log_ref, $node_state_ref);
    } elsif ($log_ref->{label} == $::LOGLABEL_XCAT) {
        if (grep(/$log_ref->{sender}/, @$candidate_mn_hostname_in_log_ref)) {
            handle_cluster_msg($log_ref, $node_state_ref);
        } else {
            handle_compute_msg($log_ref, $node_state_ref);
        }
    } elsif ($log_ref->{label} == $::LOGLABEL_HTTP) {
        handle_http_msg($log_ref, $node_state_ref);
    }
}

#------------------------------------------

=head3
    Description:
        Set node state in hash %node_state
    Arguments:
        node_state_ref: (input/output attribute), the reference of hash "%node_state". refer to function "init_node_state" for the structure of "%node_state"
        node : (input attribute) The node name
        newstate : (input attribute) The new state of node
    Returns:
        NULL
=cut

#------------------------------------------
sub set_node_state {
    my $node_state_ref = shift;
    my $node           = shift;
    my $newstate       = shift;

    if ($newstate == $::STATE_POWER_ON) {
        push @{ $node_state_ref->{$node}{allstatehistory} }, @{ $node_state_ref->{$node}{statehistory} };
        @{ $node_state_ref->{$node}{statehistory} } = ();
        %{ $node_state_ref->{$node}{errors} } = ();
        push @{ $node_state_ref->{$node}{statehistory} }, $newstate;
        $node_status_time{$node} = ();
    } else {
        my $index = @{ $node_state_ref->{$node}{statehistory} } - 1;

        if ($node_state_ref->{$node}{statehistory}->[$index] != $newstate) {
            push @{ $node_state_ref->{$node}{statehistory} }, $newstate;
        }
    }
}

